Part Number Hot Search : 
BSX52A ISL2902 MAX265 MB3730A B2312BS1 A115E 1000W DS1236A
Product Description
Full Text Search
 

To Download AM-640480G2TNQW-TA0H Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  date : 2009/9/1 ampire co., lt d. 1 specifications for lcd module customer customer part no. ampire part no. AM-640480G2TNQW-TA0H approved by date ? approved for specifications ; approved for specifications & sample approved by checked by organized by ampire co., ltd. 2f., no.88, sec. 1, sintai 5th rd., sijhih city, taipei county 221, taiwan (r.o.c.) ?h???? 88 ? 2 (|?W@^ d ) tel:886-2-26967269 , fax:886 -2-26967196 or 26967270
date : 2009/9/1 ampire co., lt d. 2 record of revision revision date page contents editor 2009/9/1 -- new release john
date : 2009/9/1 ampire co., lt d. 3 1. introduction this is a color active matrix tft-lcd that uses amorphous silicon tft as a switching device . this model is composed of a 5.7i nch tft-lcd panel , a driving circuit, touch panel and led backlight system . this tft- lcd has a high resolution (640(r.g.b) x 480) and can display up to 262,144 colors. 1-1. features vga resolution 6 bits color driver with lvds interface wide range operation temperature 2. physical specifications item specifications unit display resolution(dot) 640rgb (w) x 480(h) dots display area 115.2 (w) x 86.4 (h) mm pixel pitch 0.18 (w) x 0.18 (h) mm color configuration r.g.b vertical stripe overall dimension 127.0(w) x98.43(h)x9.1(d)---(typ) mm surface treatment antiglare , hard-coating(3h) brightness 400 cd/m 2 contrast ratio 250 : 1 backlight unit led display color 262,144 colors viewing direction 12 o?clock display mode normally white
date : 2009/9/1 ampire co., lt d. 4 3. absolute maximum ratings item symbol min max unit note power supply voltage vcc -0.5 5 v signal input voltage dclk , de r0~r5 g0~g5 b0~b5 -0.5 vcc + 0.5 v operation temperature top -20 70 storage temperature tstg -30 80 4. electrical characteristics 4-1 tft lcd module voltage item symbol min typ max unit note power voltage for lcd v cc 3.0 3.3 3.6 v power voltage for vled v dd -- 5.0 -- v vih v cc *0.7 -- v cc v logic input voltage vil 0 -- v cc *0.3 v vih 3.0 -- 5.0 v adj input voltage vil gnd -- 0.3 v
date : 2009/9/1 ampire co., lt d. 5 4-2 tft lcd current comsumption item symbol min typ max unit note lcd power current icc - 106 - ma (1) led power current i led (vled=5v) - 290 - ma note : (1) typ : under 64 gray pattern max : under black pattern (a) 64 gray pattern (b) black pattern
date : 2009/9/1 ampire co., lt d. 6 5. touch panel electrical specification 5.1 touch screen panel characteristics 1. operation temperature : -20 ~ +70 storage temperature : -30 ~ +80 2. life time : > 1,000,000 times 3. linearity : 1.5% after environmental & life test 3.0% 4. top ito film : anti-glare hard coating & anti-newton ring sheet resistance : 300 ? ~1000 ? bottom glass : sheet resistance : 100 ? ~800 ? 5. tai type : fpc gold-plated 6. meet for rohs. 7. insulating resistance : more than 20m ? at dc 25 v 5.2 touch screen pane & interface pin no. symbol i/o function 1 yu top top electrode ? differential analog 2 xl left left electrode ? differential analog 3 yd bottom bottom electrode ? differential analog 4 xr right right electrode ? differential analog
date : 2009/9/1 ampire co., lt d. 7 6. interface lvds j2: pin no symbol function 1 vdd power supply:3.3v 2 vdd power supply:3.3v 3 gnd power ground 4 gnd power ground 5 in0- transmission data of pixels 6 in0+ transmission data of pixels 7 gnd power ground 8 in1- transmission data of pixels 1 9 in1+ transmission data of pixels 1 10 gnd power ground 11 in2- transmission data of pixels 2 12 in2+ transmission data of pixels 2 13 gnd power ground 14 clk- sampling clock 15 clk+ sampling clock 16 gnd power ground 17 nc no connect 18 nc no connect 19 gnd power ground 20 gnd power ground led j3: pin no symbol function 1 gnd power ground 2 vled power supply for led 5v 3 vled power supply for led 5v 4 adj adjust for led brightness * note note : 1. adj adjust brightness to control pi n , pulse duty the bigger the brighter.
date : 2009/9/1 ampire co., lt d. 8 2. adj signal = 0 ~ 5.0v , operation frequency : 300hz~1khz 3. vss pin must ground contact , can not be floating.
date : 2009/9/1 ampire co., lt d. 9 7. ac timing characteristic of the lvds
date : 2009/9/1 ampire co., lt d. 10
date : 2009/9/1 ampire co., lt d. 11 8. optical characteristics item symbol condition min. typ. max. unit note contrast ratio cr 200 250 -- -- (1)(2)(3) luminance lw -- 400 - cd/m 2 (1)(3) luminance uniformity l 70 75 - % (1)(3) response time ( white ? black ) t r +t f point - 5 = =0 -- 50 -- ms (1)(3)(5) vertical 80 100 - viewing angle horizontal cr 10 R point ? 5 120 140 - deg. (1)(2)(4) rx 0.566 0.616 0.666 red ry 0.302 0.352 0.402 gx 0.308 0.358 0.408 green gy 0.518 0.568 0.618 bx 0.096 0.146 0.196 blue by 0.086 0.136 0.186 wx 0.296 0.346 0.396 color chromaticity white wy point - 5 = =0 0.328 0.378 0.428 -- (1)(3) note : (1) measure conditions : 25 2 , 6010%rh under 10lux , in the dark room by bm-7topcon) ,viewing 2 , vcc=3.3v , vdd=3.3v (2) definition of contrast ratio : contrast ratio (cr) = (white) luminance of on (black) luminance of off (3) definition of luminance : measure white luminance on the point 5 as figure9-1 definition of luminance uniformity measure white luminance on t he point 1 ~ 9 as figure9-1 l = [ l(min) / l(max)] x 100%
date : 2009/9/1 ampire co., lt d. 12 (4) definition of viewing angle( , ), refer to fig9-2 as below : (5) definition of response time.(white ? black)
date : 2009/9/1 ampire co., lt d. 13 9. incoming inspection st andard for tft-lcd panel defect type limit note ? 0.15mm ignore 0.15mm Q?Q 0.5mm n Q 4 spot 0.5mm n=0 note1 0.03mm date : 2009/9/1 ampire co., lt d. 14 [note3] c area: center of display area c area: outer of display area [note4] judge defect dot and adjacent dot as followi ng. allow below (as a, b, c and d status) adjacent defect dots, including bright and da rt adjacent dot. and they will be counted 2 defect dots in total quantity. (1) the defects that are not defined above and co nsidered to be problem shall be reviewed and discussed by both parties. (2) defects on the black matrix, out of display area, are not consid ered as a defect or counted.
date : 2009/9/1 ampire co., lt d. 15 10. reliability test conditions item conditions high temperature operation 70 , 240hrs* high temperature and high humidity operation 40 , 90%rh , 240hrs* high temperature storage 80 , 240hrs* low temperature operation -20 , 240hrs* low temperature storage -30 , 240hrs* thermal shock -30 (0.5hr) ~70 (0.5hr) * 50cycle note* : after 24 hr room temp. and test . 10.1 others amipre will provide one year warranty for all products and three months warrantee for all repairing products.
date : 2009/9/1 ampire co., lt d. 16 10. outline dimension
date : 2009/9/1 ampire co., lt d. 17


▲Up To Search▲   

 
Price & Availability of AM-640480G2TNQW-TA0H

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X